For years there was only 1 reputable path to store data on your computer – by using a hard disk drive (HDD). Then again, this sort of technology is presently showing it’s age – hard drives are actually loud and slow; they can be power–hungry and have a tendency to produce quite a lot of heat during intense procedures.

SSD drives, on the other hand, are fast, take in way less power and are also far less hot. They offer an exciting new approach to file access and data storage and are years in front of HDDs relating to file read/write speed, I/O efficiency and then power effectivity. Observe how HDDs fare against the modern SSD drives.

1. Access Time

SSD drives give a fresh & innovative approach to file storage in accordance with the utilization of electronic interfaces as an alternative to just about any moving parts and rotating disks. This completely new technology is noticeably faster, permitting a 0.1 millisecond data accessibility time.

HDD drives even now work with the exact same fundamental data access technique which was originally developed in the 1950s. Though it was vastly enhanced after that, it’s slower compared to what SSDs are offering to you. HDD drives’ data access speed ranges between 5 and 8 milliseconds.

2. Random I/O Performance

Resulting from the brand–new radical data file storage method adopted by SSDs, they feature a lot quicker data access speeds and quicker random I/O performance.

For the duration of our tests, all of the SSDs revealed their capacity to work with at least 6000 IO’s per second.

All through the very same lab tests, the HDD drives turned out to be significantly slower, with only 400 IO operations managed per second. Even though this may seem like a large number, when you have an overloaded server that serves numerous sought after websites, a sluggish harddrive can cause slow–loading websites.

3. Reliability

SSD drives are made to have as less moving parts as is possible. They utilize a comparable technique like the one used in flash drives and are also more dependable compared with standard HDD drives.

SSDs have an normal failing rate of 0.5%.

With an HDD drive to function, it has to rotate a couple of metal disks at a minimum of 7200 rpm, holding them magnetically stabilized in mid–air. There is a whole lot of moving elements, motors, magnets and also other devices loaded in a tiny location. So it’s no surprise that the normal rate of failure of an HDD drive varies in between 2% and 5%.

4. Energy Conservation

SSDs lack moving elements and require almost no cooling down energy. Additionally they require a small amount of electricity to perform – tests have demostrated that they can be operated by a standard AA battery.

As a whole, SSDs use up amongst 2 and 5 watts.

From the minute they were created, HDDs have always been extremely electricity–hungry devices. When you have a hosting server with many HDD drives, this will add to the per month utility bill.

Normally, HDDs consume between 6 and 15 watts.

5. CPU Power

The speedier the file access rate is, the quicker the data calls will likely be delt with. Because of this the CPU will not have to reserve allocations looking forward to the SSD to reply back.

The regular I/O delay for SSD drives is barely 1%.

HDD drives support reduced access rates in comparison with SSDs do, which will result in the CPU required to hang around, while saving allocations for your HDD to discover and return the demanded file.

The typical I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

In the real world, SSDs conduct as perfectly as they performed in the course of our checks. We produced a complete platform back–up using one of our production web servers. During the backup procedure, the normal service time for I/O requests was under 20 ms.

With the same web server, however this time equipped with HDDs, the outcome were totally different. The regular service time for any I/O call changed somewhere between 400 and 500 ms.

7. Backup Rates

Yet another real–life improvement is the speed at which the back–up was produced. With SSDs, a server back up now takes no more than 6 hours using our hosting server–optimized software.

Through the years, we have worked with principally HDD drives with our web servers and we’re well aware of their overall performance. On a server equipped with HDD drives, a complete hosting server back up will take around 20 to 24 hours.

The Linux web hosting accounts have SSD drives automatically. Be part of our family here, at s2f hosting, and find out how we can assist you to improve your site.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is setup for you totally free. 99.9% network uptime. Full root access to the server.
  • Compare our prices

  •  
  • Effortlessly compare the resources and characteristics supplied by s2f hosting’s Virtual Private Servers. Find out which VPS configuration gives you everything that you will need to take care of your multi–media web presence with no hassle.
  • Compare our hosting plans
  • Contact Us

  •  
  • Contact us night and day by email or by employing our ultra–fast ticketing platform. Our technicians are prepared to reply to your inquiries within 60 minutes.